In order to crochet, you'll need a proper crochethook. If you're more of the do-it-yourself type of person, or can't find the hook size you need in your local shop, it's easy enough to carve your own. Your own hand-carved hooks may become some of your favorites, even if you also have purchased hooks on hand.
Steps
-
Select the material you want your hook to be in. You can use a wooden or plasticchopstick, or a hardwood dowel. You can even start with a reasonably straight piece of a branch, for as long as it is well-dried. You will have less carving to do if the material starts with approximately the size and shape you want the finished hook to be, particularly thediameter.
- If you're using a chopstick, use a good, long one made of bamboo. The cheap, break-apart ones that you typically get with your Chinese takeout probably won't sand to a finish that is smooth enough.
- Different materials will handle somewhat differently. For instance, wooden and plastic hooks will be different from the commercial metal hooks. Try to experiment to see which ones suit your needs best.
- See the "Things You'll Need" section below for a list of the other items you'll need.
- Decide on the length of the crochet hook. You may wish to compare it to a commercial hook that you like working with. If you're not sure, six inches (15cm) is a good length to start with. You can also base the length of your hook on the type of project you would like to use it on, such as on Tunisian crochet - which requires a longer hook, or a much bigger project.
-
-
-
-
- Make the neck as smooth, even, and symmetrical as possible. Cut with long, smooth strokes following the grain of the wood, and rotate the material as you go.
- If you are rounding out the end of a rectangular chopstick, take more off the short sides and little or nothing off the long sides.
- Make the neck at least an inch and a half (about 3.5cm) long. The exact length doesn't matter.
- If you did shape the end with a pencil sharpener, use the shape of the point as a guide to help get the neck round.
-
-
-
-
-
-
-
- The shape and size of the point of your hook is a matter of personal preference. Try several different shapes or continue to adjust it until it feels right to you.
- Sand the hook thoroughly, especially the hook and the part of the neck that will come into contact with the yarn or thread. As much as possible, sand with the grain of the wood. A flat, inexpensive emery board will help you get in under the hook. Remember that sanding can also be used for the final shaping.
-
Tips
- Practice and experiment. Chopsticks come in pairs and most hardwood dowels come in lengths far longer than necessary for one hook, so it is easy to experiment. Much of this process can be also done by eye or by feel once you get the hang of it. You may get better at making hooks that suit your crochet style and purposes.
- Remove only a little material at a time, especially during the earlier stages. You can always take off a little more later.
- Once you've gotten the hang of making your own crochet hooks, you can start making a variety of sizes to match your crochet needs. You may find that smaller or larger hooks are easier for you to make and use.
- You probably will not replicate the gauge of commercial hooks exactly. The diameter will mostly influence the gauge. Measure the neck diameter and compare it to a table of commercial hook sizes to know what sizes your hook is closest to. It's possible to adjust many crochet patterns for almost any hook and yarn, and you may wish to learn a bit about how to do that sort of adjustment, if size matters for your pattern.
- Use the pointed end of a chopstick that is already round for the hook end on a smaller hook.
- For projects on fine crochet thread, it's probably best to buy a steel hook of the appropriate size. Steel is strong enough to hold up at the narrow diameters necessary, whereas wood may be difficult to carve so precisely.
- Work over a trash can, outdoors, or over a surface you can easily sweep or vacuum, to properly dispose of the wood chips that you will create.
Warnings
- Always point the knife away from yourself and others, so that it will never hit anybody if it slips. If it helps, work against a solid surface, such as a workbench or table. You can protect the surface with a cutting mat or an old magazine or piece of cardboard.
- Using a soft thimble helps protect your thumbs as you carve. You can hand sew one up quickly out of a thicker sort of fabric like a cleaning cloth. It will be much like a thimble for your finger, but instead, designed to fit your thumb.
Things You'll Need
- A hardwood dowel, good bamboo or plastic chopstick, or other appropriate material. Material that starts at or near the desired diameter will be easier to work with.
- A pocket knife, utility knife, or other tool for carving.
- Sandpaper, a nail file, or an emery board. The cheap emery boards without foam in between are ideal for getting in to sand under the hook. Whatever abrasive is used for the final pass should be fairly fine, equivalent to the finer side of a nail file.
- A means of cutting wood. This may be the saw attachment on a pocket knife for a slender dowel. Otherwise, any appropriate wood saw should do the job.
- Optional: a pencil sharpener.
- Optional: a pencil for marking the first cut.
- Optional: a small, round file, if you have it, is an excellent tool for shaping and smoothing the inside of the hook.