Fan Card - Red Roses
This is a new type of card with a 3D fan on the top right corner and a 3D belt with buckle on the body of the card. The kit contains the main card body, a sheet with the inserts, a sheet with the fan and belt pieces, a backing paper and two sheets containing matching envelope pieces. So there are 6 pages in all. Print the main card and fan pieces onto good quality card. The backing paper gets printed onto the back of the main card if desired. Print the inserts and the envelope pieces onto paper. You will need a brad or a gem to finish off the fan.
This card has a cream background with a red rose design.
Photographs from the Community
I printed the card of this kit onto good quality white card, and used the backing sheet on the reverse side.
I used photo paper for the decoupage and 120gsm paper for the envelope and the insert. I made up the card as per the easy instructions.
I attached the fan sections with a flower brad and used the same type for the belt. I cut out and stuck in the insert and made up the envelope as instructed. It would be good fun to add secret messages behind the fan sections - would make a brilliant valentines card in that respect.
A very stylish card which is quick and easy to make.