Christmas Flip Card Kit

I look a piece of Olive Green card 30cm x 14cm and folded in half. I trimmed 1.5cm of the front of the card opening edge. I then used a craft punch to create a decorative border of holly leaves down the opening side of the back of card.

I followed the instructions for cutting and assembling the flip card that is on pattern sheet. I then mounted the finished flip part into a piece of red handmade paper measuring 14x12cm. On the left hand side of front of card, I attached a piece of Holly red card measuring 14x6cm lining it up against folded edge. Ontop of this is a piece of of decorative green paper measuring 12.5x5.5cm. This is centred but against the fold. I then attached the flip card mounted on red paper so that is is centered . The red will over hang the front of the card but finishes just shy of the decorative edge on the back.

I then used a Christmas bauble sticker on the left handside at the top.,I look a piece of Olive Green card 30cm x 14cm and folded in half. I trimmed 1.5cm of the front of the card opening edge. I then used a craft punch to create a decorative border of holly leaves down the opening side of the back of card.

I followed the instructions for cutting and assembling the flip card that is on pattern sheet. I then mounted the finished flip part into a piece of red handmade paper measuring 14x12cm. On the left hand side of front of card, I attached a piece of Holly red card measuring 14x6cm lining it up against folded edge. Ontop of this is a piece of of decorative green paper measuring 12.5x5.5cm. This is centred but against the fold. I then attached the flip card mounted on red paper so that is is centered . The red will over hang the front of the card but finishes just shy of the decorative edge on the back.

I then used a Christmas bauble sticker on the left handside at the top.