Oriental Fan with Roses -

As This is one Sheet,I printed it out at13x18 cm 4 times and 15 x 10 once using 2 Sheets of light white A 4 Card for the larger and one of good quality copy paper for the smaller

I made a backing sheet of pearl purple card 19 x14 cm. I cut out all the elements . The first one I used D.S tape and attached it to a second white sheet of card and trimmed both to the edge of the gold border.Using D.S Tape,I attached this to the purple card.

The second sheet I removed the outer border and used D.S. Foam Tape & attached this to the Topper

The Third sheet I trimmed all the area away from the actual fan and ribbon & used D .S.Foam tape and attached this to the topper

The fourth sheet I cut out the ribbon and the roses and decoupaged them onto the topper.

This I then attached with D.S Tape to very strong white card 26 x 20cm

The smaller topper I left a small edge of white at the front edge & D.S.Taped it the bottom edge of the large topper and cut away the extra white edges.

(L&R edges) Then attached this to purple pearl card 21 x 15 cm

This was then attached to strong white card 30 x 15 to form the base of the easel.It was scored and folded at

21 cm to form the support. At the rear of the main topper I attached a hinge made of strong white card 15 cm x 3 cm Scored and folded longways attached with D.S Tape centrally 8.5 cm from top of the card.

I finished with a hand made sentiment & rose from the left over pattern added mauve satin ribbon and bows and a large mauve rhinestone.

I was so thrilled with the outcome, such beautiful shades of mauve, purple and cream, blended together and so easy to for see an outcome

Thank you for this design.

Pamela Horton

Wellington Point QLD