Wistful Girl Various Occasions Aperture Card
This is an aperture type of topper and insert. Put the aperture onto your card front using either foam pads or doublesided tape and cut out the centre section.
You might cut the aperture section first and use that as a template to cut your card front.
Make sure to centre them. And with the insert, place this on the centre of the inside of your card. There are various sentiments for different occasions and a blank one for your own words.
The font used is Monterey BT and the size of the squares are roughly 135mm/and a little less than 5 1/2 inches.
Photographs from the Community (1)
I printed the design onto good quality photographic paper and cut it out. I scored and folded a 6 x 6 scalloped edged card. I cut out the aperture on the front panel of the design before attaching it to the card using double sided tape.
I then cut away the white area of the card behind the aperture. I then attached the inside panel so that it is lined up and visible through the aperture on the front of the card.
I added the greeting using thin foam tape.
