Created By
Description
Original Pattern Video: http://www.youtube.com/watch?v=ik7HBHW-Lyo ? Click "Show more" for Pattern Instructions ¦ Beginners Click Here: http://www.beyondbracelets.net/bracelets Material: Six Stranded Embroidery Floss ¤ Pattern Grid: http://friendship-bracelets.net/pattern.php?id=3001 _________________________________________________ ¦ My Art Gallery & Online Shop: http://beyondbracelets.storenvy.com/ _________________________________________________ ¤ PATTERN INSTRUCTIONS ¤ LENGTH: All strands should be roughly 65 inches long and will then be folded in half to form a loop and doubles of each thread. � SETUP: -Left- 12 22 21 -middle- 12 22 21 -Right- 1-Pink 2-Black ¤ PATTERN INSTRUCTIONS ¤ Prior to starting you may use the paired method of the original video to make a straight base if you wish- that or you can start with the first set of strings on the left to make a basic inverse chevron ( http://www.youtube.com/watch?v=EVWGJ54zUnI ) or a double inverse chevron. *Single inverse chevrons on either side will work fine- the double is simply joined but so close to the start it will not be noticeable. Once you complete your chevron on either side you will have a base for the pattern. ¦ Step 1: Creating filler diamonds with the four middle strands. Start with the two middle strands and make a knot between them. Since they are the same color you may use any knot type so long as they join together. When you have the two middle strands joined make a BK with the left most middle strand and FK with the right most middle strand (mini upside down chevron) then join the two middle strands once again. You now have a diamond. Repeat with the other side so you create two filler diamonds side by side. ¦ Step 2: Chevrons. You can now complete two single chevrons. Create one on the left and one on the right side of the bracelet. ¦ Step 3: Filling The Gap: You now will repeat the method above making a filler diamond in the middle following with a single chevron below it. � IMPORTANT � Before stacking the pattern make sure to make the mini triangles on either side of the bracelet as well. They are a crucial step and will set your knots up for the repeat. ¦ Step 4: Mini Triangles. To make the left mini triangle take the left most strand and make a FK. Once you have the FK done follow up with your "lattice weave" by taking the third strand from the left (which should be your lattice color) and make two backward knots. Same method will be used for the right side only opposite all steps. ¦ Step 5: Opposites Attract: To make the right mini triangle take the right most strand and make a BK. Once you have the BK done follow up with your "lattice weave" by taking the third strand from the right (which should be your lattice color) and make two backward knots. *Repeating from Step 1 will stack the pattern. _________________________________________________ Thanks for watching ? _________________________________________________