6 3/4 x 8 3/4 picture frame for 5x7 photo pattern download kit for washable, sewn or no sew, fabric, or paper card stock easel frame for cards, display, wedding
This is a GREAT, easy / beginner craft / papercraft project, and would make wonderful Christmas / holiday gifts! This photo frame is also great for weddings, showers, displays, sign display, poem / word art, card design display,
Make a picture frame, for a 5x7" photo, with fabric, paper card stock, vinyl, leather, wallpaper! If you make the frame out of fabric, whether you sew it or not, it will be made WASHABLE! 2 sets of patterns included, 20 page pdf zip download, table of contents, instructions, and links listed to buy supplies online. Can buy many of the supplies from Barnyarns, Hobbycrafts, Amazon.co.uk, thermowebonline.com, and in the US, Walmart, Michaels, Joann.com, & ACMoore.com, along with other craft stores, fabric shops, art supply, office / stationers.
6 3/4" x 8 3/4" picture frame for 5x7 photo pattern download kit for washable, sewn or no sew, fabric, or paper card stock easel frame for cards, display, wedding
There is an opening for the photo and its protective sleeve, an acid free / photo safe clear sheet protector page cut to size of 5x7" photo, an opening for the removable easel back board, and an opening for the removable easel strut leg board, board patterns included, that slide out of their respective pockets that you can easily make. Guidelines for where to cut, fold, and hole punch circle holes, or poke & cut out with embroidery like scissors are included and print on each panel part pattern page. One set of patterns you print onto Ultrahold, the other set of patterns you print onto paper. There are circle holes to hole punch or poke & cut out, on the easel back panels, for hanging the frame horizontally or vertically, on their own or use ribbon thread through them to hang them. The easel strut leg allows for the frame to stand on a table or shelf, making it a table or tabletop accessory. Ribbon connects the bottom right corners of the easel back & strut leg pocket, to allow the frame to stand.
The Ultrahold, along with the removable strut leg & easel back boards, allow for the frame to keep it shape, after washing allows it to keep its structure, and allows it to stad on a table or shelf. You iron the Ultrahold to the back of the fabric panels, then cut away corners, cut out the center, cut into the inner and away at the outer corners, fold under the seam allowances or flaps, hot glue, iron down if fabric with Ultrahold.Tthread the 1/8" or 3mm wide ribbon, 5 feet long, through the 7 u shaped holes on panels 2 & 3 to make the photo pocket. Then assemble the panel parts with hot glue, scrapbook tape, or sew. Place wide ribbon 1" to 1 1/2" wide, by 9" long at bottom right corner between to strut leg panels. Once panels are assembled, place strut leg, or for fabric frames, place strut leg pocket, with strut leg board inserted into pocket, onto easel back, aligning any design prints on the fabric, and the align the bottom right corners of the strut leg to the easel back. Hot glue the top of the bendable, strut leg to the easel back, then stand the frame upright, push the ribbon under the frame and in front of it, cut down to 1" past the bottom of the frame in front of it. Place a pin where the ribbon meets the bottom of the frame, tuck into the little pocket between the layers of the easel backs at the bottom right corner, until you reach the pin, then hot glue inside the pocket to secure the ribbon. Then cut your clear protective photo sleeve from the sheet protector.
The blue wood print paper part panels featured in the product's image profile is not included, its just used to demonstrate that you print 6 paper card stock panel part patterns, and to its left shows the 8 sheets of Ultrahold printed panel part patterns. The paper card stock printable panel part pattern sheets print black lines, guidelines, and circle holes onto the sheet, so you may want to use a white card stock or inkjet printer paper.
You can buy mat board or cardboard for the removable easel back & strut leg boards, 8x10" piece should do the trick, 1/16" thick.
Ple
And all you need are:
6 sheets of card stock paper
2-3 different lengths and widths of ribbon
10 hot glue sticks and a low temp glue gun
one clear, acid free, sheet protector page for the protective photo sleeve
optional 6 laminating sheets, clear vinyl, clear iron on vinyl by Therm o Web, decoupage, or transparent contact paper shelf lining
For fabric frames:
FABRIC: 1 to 1 1/2" yards of fabric, or 8 - 9x12" pieces of fabric
ULTRAHOLD: one 4.6 meter / 5 yard roll of Ultrahold, that you will print the 10 panels onto 8 sheets of paper back, iron on Ultrahold, an acid free, photo safe, fabric adhesive interfacing fusible web that the patterns will print onto using your inkjet printer One 5 yard or 4.6 meter roll yields 32 - 8 1/2" x 11" or A4 size sheets to print on, enough to make 4 frames from this download!
optional roll of thread, if sewing, just use stitch length 3 or 4, and denim weight machine needles 100/16 or 110/18 weight
also:
straight pins
paper trimmer
fabric scissors
hole puncher and/or embroidery like, pointy, small scissors - Fiskars makes a non-stick pair perfect for this craft
paper scissors
iron
optional mini iron
Washable, sewn or no sew, fabric, also paper, card stock, vinyl, leather, wallpaper papercraft picture frame / photo frame, design, structure, layout, printables, & download are copyright protected by Kristie Hubler. All Rights Reserved. Not for resale. For personal use only. For licensing opportunities, or to resell the finished product of this frame, please contact me for royalty rates, 8% of the manufacturing costs, $5 to sell physical print out kits, please contact me, Kristie Hubler at [email protected]
http://craftsuprint.com/kristie-lynn-hubler
