Vivi Gade Design Paper (the Skagen series) and photo paper are glued onto the card using double-sided adhesive tape. The metal cross is attached with 3D foam pads.
Cut approx. 1.5cm off the front of the card (horizontally).
Cut a piece of Vivi Gade Design Paper to size and attach it onto the card with double-sided adhesive tape.
Tie a piece of silver-plated wire onto a cross. Twist the ends around a thick needle.
Attach the cross onto the card with 3D foam pads.
Print out a photo and glue it onto a piece of pearlescent card which fits the front of the card. Glue this inside the card.
Attach a piece of printed photo paper – the same size as the back of the card – using double-sided adhesive tape. Print out the menu or write it with a silver gel pen.
Divide a card into two for a menu card and a place card: 10cm and 5cm. If a large number of place cards is required, divide the card into three.
Assemble the cards in the same way as the invitation with Skagen Paper, photocopies and texts.
