1. Cut or punch out felt and reflector in the wanted figure (if the reflector has to turn around, cut out 2 similar reflectors and felt figures. If you want a back, only cut out 1 reflector and a felt sheet without hole, besides the felt front page). 2. Iron on the reflector (iron with 2-3 dots with a piece of fabric between). 3. Glue on the front page with super hobby glue (is the reflector outermost without front page, knit/sew the extra one on the felt). 4. Make a hole for the strap with punch pliers or eyelet punch. 5. The strap is either made of reflective ribbon or satin cord – end with a safety pin in a fresh colour (see main catalogue page 32, item number 41-100). 6. If you want extra decoration, put any rocaille beads in fresh colours on bead wire and end with small punched felt figures. 7. You will find patterns on figures below here otherwise use the figures for the Big Shot machine. Note! Do not wash the reflector.
