Unicorn (6) Camera Eye TopperCompleted by Jean-Marie Penny

I made a Z fold card from an 8" square (20cms) card. (finished size 8" x 6" (20 x 15cms)).

I printed the design and 2 matching backing papers onto 120gsm paper. I attached 1 to the inside back with dst and cut off the excess and then half of the other to the front and cut off the excess. The excess I cut off I stuck to the 2" (5cms) strip and then attached it to the main card with a wet glue. I made a text plate and attached it with a foam pad. The base layer was mounted onto rainbow mirri card with a small border, the camera eye pieces were attached with foam pads. I used one of the tags and attached it to the inside with a foam pad.