I Love You TriangleCompleted by Susan Parker

I scorded my card down the centre. Then I used my craft knife to cut the card from the top centre to the Bottom righthand corner, I used 3D pads on the red layer and positioned it on the front of the card.

I took the heart layer and put 3d pads on it and placed it on top of the red layer.

I then cut 3 hearts out and put the 3D pads on the back of each one and placed them on the edge of the heart layer.

I then cut out the Heart oblong with the Heart attached and used this for the insert.

If you do not what to use the 3D pads you can just matt and layer. Lovely easy card to put together.