Vintage Car in Shed RedCompleted by Gwyneth George

The sheet was printed onto super smooth card and the pieces cut out. I attached the doors to the front of the shed with glue gel to allow for a bit of movement to get them into place.

I attached the main image at a slight angle to the front of a white A6 card and put some gold border peeloffs down the right hand side.

I built up the car and shed layers using 1mm deep double sided foam tape. I trimmed the blank greetings plate to a slightly smaller size, stuck on the letters D A D and trimmed around the outside with straight gold peeloffs.

I used the same gold peeloff to attach it to the shed as hanging wire and put a small piece of black peeloff as a "nail" at the top of the gold loop.