Touch of Victorian 3Completed by Darlene Handorff

THis is one I made to be a locket card. It is a small card approx. 1/4 letter sized when closed. It can be used for numerous occasions, Mother?s Day, Birthday, St Patrick?s Day, Good Luck, etc.

I printed the pattern onto good photo paper and cut out the parts to the pattern. I used a half sheet of nice smooth card stock folded in half for the card.

I covered the card from front to back with a green and blue flourish design, and then on the inside covered both sides separately with the same pattern which I had in my cup stash.

Then I attached the the front middle section of the pattern with dimensional foam to the front of the card..

THen I attached the section seen on the left side of the pattern without dimension, then the section seen on the right of the pattern was put into place however the section piece on the top left (green oval door) was attached first under it and I added more dimension foam under the bow as I added that portion.

Added a little splash of gold foam to the locket door and piece of chain below the bow. I used the last piece the bottom mid section on the inside for an insert piece. It made up nicely and can be used for many occasions.