Cute Cats Quick Card with Wavy Spiral Side StackerCompleted by Rita Curtis

I made a base card 13x6.5inches from an A3 sheet of white hammered card and made into an easel card.

I printed the cup sheet onto glossy photo paper and cut out. I took the cup sheet into a graphics programe and made backing sheets.

I cut a 6inch square of silver mirri card and layered a 5.75inch square of backing paper onto it with double sided tape.

I stuck the base picture to a 4.75inch square of silver mirri card and stuck to the centre of the backing sheet on the larger square, then layered up the decoupage.

I also stuck some backing sheet to the back of the main picture when the decoupage was dry.

I then attached the bottom half to the front section of the main card. I cut a piece of silver mirri paper and stuck to the bottom layer of the card. A square of backing paper was stuck to the silver mirri paper leaving a small border. This should mirror the front of the card.

I made a message tag using white card, silver mirri card and a piece of backing paper amd attached to the middle of the bottom of the card with foam tape, then added a silver Happy Birthday peel off.