Elegant Tree Spiral Edge Stacker 7x5in Card Front

I have designed this card front in my spiral edge stacker concept to create a spiral edge around the card front.This is a 7inch x 5inch square card front so it will fit the A5 cards if you add a backing paper.

Simply cut out the base image and attach to your card or project flat, then cut out the edges starting at number 1.

Glue your edges using a 3D glue or foam pads, and attach to the base image going around the outside, each edge overlaps the last, this will build up the outside edge into a 3D decoupage effect.

As you glue the edges you are going around the card in a spiral effect.

The Designer accepts total responsibility for this product, its use and any copyright issues that arise.