Church Window Ruffles 2 Spiral Edge Stacker 7x5in Card Front
I have designed this card front in my spiral edge stacker concept to create a spiral edge
around the card front.
This is a 7inch x 5inch square card front so it will fit the A5 cards if you add a backing paper.
Simply cut out the base image and attach to your card or project flat, then cut out the edges starting at number 1.
Glue your edges using a 3D glue or foam pads, and attach to the base image going around the outside, each edge
overlaps the last, this will build up the outside edge into a 3D decoupage effect. As you
glue the edges you are going around the card in a spiral effect.
I have also designed a matching cut and fold card in the 7x5inch size as well as a frame and front sheet.
This card could be used for so many different occassions, Weddings, Anniversaries, Confirmation, Baptisim etc.
Photographs from the Community (1)
I printed this sheet onto good quality photographic paper and cut out all the parts. I then attached the main picture to a card blank and added the layers with foam pads. I also added pearls in the corners.
