Tropical Birds Spiral Edge Stacker Card Front
I have designed this new concept to create a spiral edge stacker around a card front.
This is a 5inch x 5inch square card front, and you simply cut out the base image and attach
to your card or project flat, then cut out the edges starting at number 1. Glue your edges using
a 3D glue or foam pads, and attach to the base image going around the outside, each edge
overlaps the last, this will build up the outside edge into a 3D decoupage effect. As you
glue the edges you are going around the card in a spiral effect.
Photographs from the Community
With this design i placed the main design base in the centre of a 5x5 light yellow card, to give the design a framed look, i then built up the design as instructed, finishing off with a light green bow at the top left, this is a fantastic design, when made up, its different, this design would suit any ocassion.