Football Slider
A penny slider with football theme.
Photographs from the Community (4)
See the How-to video on CUP TV.
I printed the download onto heavyweight white card (250gsm) at 50% to fit a 6x6" card blank. Cut out the pieces. Glued the pitch across the card front. Put 3D foam strip along the long edges of the "roller track" and adhered onto the pitch. (Leave space for the coin to roll between the tape!)
Made a penny roller by sandwiching two coins together around a 3D round foam dot (see photo). Used double sided tape to adhere football image to one coin and then eased the roller into the track. Tilt left and right and the coin rolls up and down the pitch!
I finished the front with a Happy Birthday sentiment (CUP16283_176) and beer and football images from the Football Slider kit.
I added a football themed insert (CUP887346_176) which complements the card perfectly.
Printed the download onto heavyweight white card (250gsm) at 50% to fit a 6x6" card blank. Cut out the pieces. Glued the pitch across the card front. Put 3D foam strip along the long edges of the "roller track" and adhered onto the pitch. (Leave space for the coin to roll between the tape!)
Made a penny roller by sandwiching two coins together around a 3D round foam dot (see photo). Used double sided tape to adhere football image to one coin and then eased the roller into the track. Tilt left and right and the coin rolls up and down the pitch!
I finished the front with a Happy Birthday sentiment (CUP16283_176) and beer and football images from the Football Slider kit.
I finished with a football themed insert (CUP887346_176) which complements the card perfectly.
Printed the download onto heavyweight white card (250gsm) at 50% to fit a 6x6" card blank. Cut out the pieces. Glued the pitch across the card front. Put 3D foam strip along the long edges of the "roller track" and adhered onto the pitch. (Leave space for the coin to roll between the tape!)
Made a penny roller by sandwiching two coins together around a 3D round foam dot (see photo). Used double sided tape to adhere football image to one coin and then eased the roller into the track. Tilt left and right and the coin rolls up and down the pitch!
I finished the front with a Happy Birthday sentiment (CUP16283_176) and beer and football images from the Football Slider kit.
I finished with a football themed insert (CUP887346_176) which complements the card perfectly.
Printed the download onto heavyweight white card (250gsm) at 50% to fit a 6x6" card blank. Cut out the pieces. Glued the pitch across the card front. Put 3D foam strip along the long edges of the "roller track" and adhered onto the pitch. (Leave space for the coin to roll between the tape!)
Made a penny roller by sandwiching two coins together around a 3D round foam dot (see photo). Used double sided tape to adhere football image to one coin and then eased the roller into the track. Tilt left and right and the coin rolls up and down the pitch!
I finished the front with a Happy Birthday sentiment (CUP16283_176) and beer and football images from the Football Slider kit.
I finished with a football themed insert (CUP887346_176) which complements the card perfectly.
More Products from Chris Harland