Santa Head RedCompleted by Jean-Marie Penny

I chose a DL card for this one and printed the design onto 150gsm glossy photo paper. I cut it out and stuck the Santa head and slider to 200gsm card with wet glue and left to dry.

I mounted the backing paper to the card using DST.

Once dry I cut out the Santa head and slider from the card. I sandwiched the slider between 2 x 1pence pieces with a circular foam pad. I added 2 layers of 2mm shaker tape to the back on the long sides of the slider, making a 4mm gap, and attached to the card.

Using extra sticky DST I attached the Santa head to the penny and added a peeloff greeting and 2 holly leaf corners.