Nativity Decoupage or Shape Card
Contemporary nativity scene. Use the elements to create a standard 3d decoupage sheet on a card front, or alternatively it makes an interesting shaped card.
Cut out the stable front and trim the excess roof on the left side.
Stick to a folded card aliging it to the left fold.Then cut out the stable shape. Stick the internal stable image inside the card, making sure it matches up with the door and window on the front.
Decoupage up the remaining elements.
Photographs from the Community (1)
The sheet was printed onto glossy photo card and the elements cut out, including the door and window apperatures. I used a side fold 13.5cm square card as the base for this card and stuck the front on using a glue roller.
I then trimmed the extra bits of the card that were sticking out around the roof off. I opened the card before trimming out the door and window from the card as well. The scene was stuck inside the card using glue gel as a flat glue to allow for some movement so that the cow was centre of the window.
The bird, sheep and cow elements were gently shaped before being stuck on with blobs of glue gel. The star, window shutter and roof were stuck on with the same glue but kept flat, not shaped.
