Gold Metallic 50 Birthday 7x5in Shaker Frame and BaseCompleted by Wynona O'neil

I cut out my design, including cutting out the oval frame on the second part of the design. I used a brown card and added some gold glitter paper to the base. I then fixed the first half of the design to my base card.

I carefully squeezed a bed of glue around the edge of the oval and let that dry. I added some little gold beads into the open centre. Into my cut out oval on my second part, I glued a piece of acetate.

I then secured 4 foam pads to the corners of the design before adding a little more silicone to the original bead of silicone and carefully placing the second part of the oval onto the wet silicone of the base.

I added a 50th Peel off sticker and a greeting.