Bird House Over the Edge Shaker
Over the edge birdhouse shaker card. These cards are so easy to make with such great results. Beautiful colors with a bit of whimsey.
Shaker Card Directions:
1.Cut out all elements including the white cut-out area.
2.Apply double sided foam tape to the main image being
sure there are no open areas.
3.Add acetate with double stick tape to the frame section.
4.Attach the main image to a card blank.
5.Spoon your shaker material into the main image area.
6.Attach the frame to the top of the foam tape on the main image being sure to press down all the way around to secure.
Photographs from the Community
![](http://www.pinterest.com/pin/create/button/?url=https://www.craftsuprint.com/card-making/shaker-cards/various/bird-house-over-the-edge-shaker.cfm&media=https://s3.amazonaws.com/finished-cards/peggy-stogdill/photo325934.jpg&description=Bird House Over the Edge Shaker%20on%20Craftsuprint%20created%20by%20Peggy Stogdill%20-%20I had such fun with this card! Printed on matte photo paper. I cut out and mounted the base image onto dark blue cardstock, cut just slightly larger than the frame and then onto a "stash" paper. I cut out the second frame and removed the square in the middle, then taped a piece of acetate to the back. I used long, narrow foam pads, stuck on the backside of the frame as close to the inner edge of the frame as possible and without any gaps, then put a little scoop of birdseed into the center of the base image, and carefully placed the open frame over the base image. I glued the second image of the birdhouse and bird flat onto the frame, but with a tiny foam pad under the left corner of the roof where it sticks out. Added the third bird image with silicone gel, and finished by gluing on the sentiment, a blue cardstock border across the top, and a matching border across the bottom that I punched out with my "Birds on a Wire Punch." This is CUTE!){kind=link}
I had such fun with this card! Printed on matte photo paper. I cut out and mounted the base image onto dark blue cardstock, cut just slightly larger than the frame and then onto a "stash" paper.
I cut out the second frame and removed the square in the middle, then taped a piece of acetate to the back.
I used long, narrow foam pads, stuck on the backside of the frame as close to the inner edge of the frame as possible and without any gaps, then put a little scoop of birdseed into the center of the base image, and carefully placed the open frame over the base image.
I glued the second image of the birdhouse and bird flat onto the frame, but with a tiny foam pad under the left corner of the roof where it sticks out.
Added the third bird image with silicone gel, and finished by gluing on the sentiment, a blue cardstock border across the top, and a matching border across the bottom that I punched out with my "Birds on a Wire Punch." This is CUTE!
More Products from Diane Hannah
