2 Christmas Puppy Dangler Card Fronts 1Completed by Lesley Williams

I printed the sheet onto good paper and cut out all elements. I then used a computer graphics program to reverse the dangler image, printed it off and cut it out.

To assemble, I marked the aperture in pencil on the front of a white card and cut out with a craft knife.

I attached a length of clear beading thread (or fishing line) to the back of the dangler and then stuck the reversed image on top, matching the shape carefully.

I attached the other end of the thread to the top of the aperture using a tiny piece of tape, then glued the frame in place over the top.

I used gold an holographic peel off borders to complete the card.