2 Cocktail Dangler Card FrontCompleted by Lesley Williams

I printed the images onto good quality paper and cut them out. I positioned the main image onto a toning card front and drew round the oval aperture in pencil before cutting carefully with a sharp craft knife.

I then used pc software to create a reverse image of the "dangler" which I printed and cut out. I attached a length of clear nylon line to the back of the dangler and then used photo glue to stick the reverse image to the back, matching carefully.

I used a small piece of tape to attach the dangler thread to the centre of the top of the aperture and then carefully positioned the frame to the card front with photo glue, trapping the thread between the layers.

I finished off using toning peel off borders. I then created an insert using the main image again, but faded out so that it showed behind the dangler.