With Sympathy

I printed the sheet out onto Crafty Bob paper and cut out the layers. For this card I decided to keep it simple so chose to use just the base layer and the single oval layer. I matted the base image layer onto a golden coloured Satin Board and trimmed it to give a small border. I did the same with the greetings panel. I also selected one of the greetings panels. I took a black, square, scaloped edge card and placed it fold at the top. The matted base image was stuck as an "over the top" element onto the card using 1mm deep, double sided, foam tape. I used the same tape to attach the oval layer onto the base layer and also the matted greetings panel to the bottom of the card. I then just put a white insert inside the card.

This is a simnple image that makes a lovely sympathy card, however you decide to build it up.