DIY Carpenter/joiner Dude Pyramid.
This Dude likes nothing more than bashing out some furniture in his workshop complete with tools and even a lathe!
Easy to make, just cut out and layer up! With blank and sentiment tiles!
Photographs from the Community (1)
I printed the sheet onto Super Smooth white card and cut out all the layers. I prepared an A5 card from an A4 sheet of irridescent bronze card. I took some wood effect sticky back plastic and stuck this down two thirds of the front on the right hand side. I put a strip of brown textured card over the edge of this. I took the base image and stuck this to a piece of the same brown card and trimmed to leave a border of around 3mm. This I stuck to some gold irridescent card and trimmed to leave a border of around 6mm. The matted image was stukc to the card at a jaunty angle using 2mm deep double sided foam tape, as was the blank greetings panel. I then stuck on each of the pyramid layers using 1mm deep double sided foam tape.
A great card for a man, whether he's into DIY or a joiner by trade.
