Orange Gatefold Topper

I printed the sheet onto glossy photo paper and cut out all the pieces. I made a base gatefold card by cutting a sheet of black card to 28cm in length and scoreing at 7cm and 21cm from one side. I then folded the card into shape.

I stuck the two side panels to both sides of the card front. I trimmed a piece of gold holographic card to just smaller than the card size and stuck this to the inside back of the card. The base image was stuck directly to this and three layers of pyramid were built up, sticking each in place using 1mm deep, double sided, foam tape. I finished off by placing a piece of good quality white paper inside the left hand "gatefold door" for a greetings to be written on before sending the card.