Iris Magic with Ribbon Add Your Own Greeting

I actually created two cards from this one sheet. I printed the sheet onto Super Smooth white card and cut out the pieces. For one card I took a plain A5 white card, put a velum wrap (velum printed with an iris outline image in gold) around the card before sticking the large, base, image to the front. I then built up the two smallest layers on top of the main image, sticking them in place using 2mm deep double sided foam tape. I also used the same tape to attach one of the greetings pannels.

The other card was made by taking a plain white 13.5cm base card, putting a vellum wrap around it that had a slightly different iris image printed in gold on it. On this second card I stuck the ribbon element down towards the left hand side, stuck the remainin iris image towards the top right and the remainin blank greetings pannel towards the bottom right.

I've left both cards blank for the moment until I know the occasion they are to be given for as they could be used as a loveley thank you card, for a birthday or a get well.