Paper Piercing/ornare FramesCompleted by Gwyneth George

I printed out the sheet onto cheap copier paper and then chose the frame with the scaloped outside for this project.

I lay the sheet over a piece of Centura Pearl Snow White card and after taping it in place with low tack tape I pricked through the pattern sheet into the card.

After finishing pricking I cut around the pannel some 2 to 3 mm outside the scaloped pricked outline. I embossed a line just outside the straight, oblong, frame and stuck some scaloped edged silver peeloffs just inside the same straight sided frame.

I mouned a cupcake topper from my crafty stash in the middle of the frame usng 3mm deep double sided foam tape before sticking the whole thing onto an A5 pink card and finishing off with a pink polkadod, chiffon ribbon.