WEDDING DAY BRIDE & GROOM Coral Grey 7.5 Decoupage & Insert Kit

I printed the sheets onto matte photo paper, cut out the pieces and mounted the main image onto an 8x8" card.

I added the layers using sticky pads then added the bride & grooms names using the smaller letter tiles. I completed the card with some toning gems. .

Love this card. Different names could be added up to a maximum of 12 letters including the &.

Giftboxed wedding card for a Daughter & Son in law. I printed onto glossy printable decoupage paper. I cut out all the elements building up the layers using pin flair glue. I used white shimmer card layered with soft pink floral print paper. I used tags from the kit.

I embellished with Mr & Mrs ribbon adding butterflies from the kit with pink gems & pearls. I finished with the matching insert. Cup 952201_68. Designer Janet Briggs

Printed on 250 gsm card.

Used 8x8 cream card blank, layered a sheet of design paper on card. Layered the topper up.

Glittered the butterflies and added stamens within the flowers. Used 3d foam on the topper and placed on card at an angle. Used the tiles to do the Mr & Mrs.

Stunning Kit

Can be personalised with Mr & Mrs .......

I printed out the design onto A4 white card and cut out the components, and the required lettering for a personalised card.

Next, I mounted each individual component onto Pink A4 paper using DST and cut out leaving a narrow margin around each piece.

This was then mounted onto silver glitter card using DST and, again leaving a narrow margin. Lastly, I used DST to stick it to another piece of A4 pink paper and the whole image was stuck onto a pre cut 8 X 8 white blank greeting card.

The card was decoupaged using additional pieces that were cut out, and stuck with foam squares to give the raised effect.

Finally, I added the required name lettering and greeting and added a few individual imitation half pearls to the bride's hair.

The insert was created by writing a poem, myself, and using Word added it into a text box which was then overlayed onto the insert design, editing the size/ dimensions as required.

To finish, I printed onto A4 plain paper and stuck into the card using DST along the centre seam of the card.

This beautiful card was printed out onto gloss photo paper and attached using 3d pads to build up the picture added glitter glue onto dress and gems on the side of the card and back of the head added sentiments.

Giftboxed wedding card for a Daughter & Son in law. I printed onto glossy printable decoupage paper. I cut out all the elements building up the layers using pin flair glue. I used white shimmer card layered with soft pink floral print paper. I used tags from the kit.

I embellished with Mr & Mrs ribbon adding butterflies from the kit with pink gems & pearls. I finished with the matching insert. Cup 952201_68. Designer Janet Briggs

Giftboxed wedding card for a Daughter & Son in law. I printed onto glossy printable decoupage paper. I cut out all the elements building up the layers using pin flair glue. I used white shimmer card layered with soft pink floral print paper. I used tags from the kit.

I embellished with Mr & Mrs ribbon adding butterflies from the kit with pink gems & pearls. I finished with the matching insert. Cup 952201_68. Designer Janet Briggs

Giftboxed wedding card for a Daughter & Son in law. I printed onto glossy printable decoupage paper. I cut out all the elements building up the layers using pin flair glue. I used white shimmer card layered with soft pink floral print paper. I used tags from the kit.

I embellished with Mr & Mrs ribbon adding butterflies from the kit with pink gems & pearls. I finished with the matching insert. Cup 952201_68. Designer Janet Briggs

Printed on 250 gsm card. Cut out all the elements. Used 8x8 cream card blank, layered a sheet of design paper on card. Layered the topper up. Glittered the butterflies and added stamens within the flowers. Used 3d foam on the topper and placed on card at an angle. Used the tiles to do the Mr & Mrs.

Stunning Kit

I printed out the design onto A4 white card and cut out the components, and the required lettering for a personalised card.

Next, I mounted each individual component onto Pink A4 paper using DST and cut out leaving a narrow margin around each piece.

This was then mounted onto silver glitter card using DST and, again leaving a narrow margin. Lastly, I used DST to stick it to another piece of A4 pink paper and the whole image was stuck onto a pre cut 8 X 8 white blank greeting card.

The card was decoupaged using additional pieces that were cut out, and stuck with foam squares to give the raised effect.

Finally, I added the required name lettering and greeting and added a few individual imitation half pearls to the bride's hair.

The insert was created by writing a poem, myself, and using Word added it into a text box which was then overlayed onto the insert design, editing the size/ dimensions as required.

To finish, I printed onto A4 plain paper and stuck into the card using DST along the centre seam of the card.

I printed out the design onto A4 white card and cut out the components, and the required lettering for a personalised card.

Next, I mounted each individual component onto Pink A4 paper using DST and cut out leaving a narrow margin around each piece.

This was then mounted onto silver glitter card using DST and, again leaving a narrow margin. Lastly, I used DST to stick it to another piece of A4 pink paper and the whole image was stuck onto a pre cut 8 X 8 white blank greeting card.

The card was decoupaged using additional pieces that were cut out, and stuck with foam squares to give the raised effect.

Finally, I added the required name lettering and greeting and added a few individual imitation half pearls to the bride's hair.

The insert was created by writing a poem, myself, and using Word added it into a text box which was then overlayed onto the insert design, editing the size/ dimensions as required.

To finish, I printed onto A4 plain paper and stuck into the card using DST along the centre seam of the card.

I printed out the design onto A4 white card and cut out the components, and the required lettering for a personalised card.

Next, I mounted each individual component onto Pink A4 paper using DST and cut out leaving a narrow margin around each piece.

This was then mounted onto silver glitter card using DST and, again leaving a narrow margin. Lastly, I used DST to stick it to another piece of A4 pink paper and the whole image was stuck onto a pre cut 8 X 8 white blank greeting card.

The card was decoupaged using additional pieces that were cut out, and stuck with foam squares to give the raised effect.

Finally, I added the required name lettering and greeting and added a few individual imitation half pearls to the bride's hair.

The insert was created by writing a poem, myself, and using Word added it into a text box which was then overlayed onto the insert design, editing the size/ dimensions as required.

To finish, I printed onto A4 plain paper and stuck into the card using DST along the centre seam of the card.