Birth Date Calendar Baby Girl
The beauty of this design is you can choose the Day, Date and Month of the Baby, just by turning the wheels! The 2 sheet kit includes main card with decoupage and wheels and decoupage (no sentiment tags)
Cut out the main front first, cut out the rectangles that state month and day, also the area at the top (see image how it should look) then pierce the center of the little dark circles on the card and the wheels, then cut out the date, day or month wheel, and by using a brad at the front you can attach the wheel behind the card front. When all three wheels are in motion place your sticky pads on the back - always making sure the wheels move, then attach to your card, the size is approx 19.5cm square (just under 8") then layer using foam pads.
There is a matching insert for this design and there is another version for a baby boy see cup442272_1566. Thanks for looking.
There is a smaller version with a different design see cup362677_1566
Photographs from the Community (2)
Printed onto 250gsm card. Attached the wheels to the reverse of the topper using brads then mounted onto white card front using foam tape.
Added decoupage using 2mm foam pads then finished with gems in each corners & matching insert.
I printed these sheets onto photo paper and cut the elements out. I backed the card front and the three wheels onto cardboard, to make it more stable. I cut out the white bits and punched holes in the base and the wheels, when shown.
I used big pink brads to attach the wheels to the base. I took a 20cm x 20cm card blank and cut out the corners and the top section so the wheels are easy to turn.
I mounted the base onto the card with 2mm foam tape, and then added the decoupage elements with 1mm foam pads.
More Products from Lorraine Appleby
