Dad Fathers Day Shaped Card
This design will make a 7 width x 71/2 inch height card, All elements you can decoupage. Cut out all the white bits on the word Dad to form your shaped card. Cut out all elements and attach to main topper with 3d foam pads.
Included is an insert with a lovely verse especially for Dad. See My Gallery for a made up card.
Photographs from the Community (3)
I printed out on to 160gsm. I made a 7x7.5" card blank. I cut out the main piece and cut out the white from DAD. I stuck to the card blank with wet glue.
I cut out a the DAD, Sign and the books, and stuck the word with wet glue and the books and sign with foam pads.
I added the insert inside with wet glue.
Printed off all elements onto 250gsm card. Printed insert onto 160gsm paper.
Cut a piece of A3 card, 12 1/4 inches width x 71/2 inch height, I then attached the topper so the DAD base layer hung over the edge of the card then scored down about 2/8ths of an inch from the left side of the topper, cut out all decoupage pieces and attached with 3d foam pads.
Inserted the insert with double side tape.
I printed out on to 160gsm. I made a 7x7.5" card blank. I cut out the main piece and cut out the white from DAD. I stuck to the card blank with wet glue.
I cut out a the DAD, Sign and the books, and stuck the word with wet glue and the books and sign with foam pads.
I added the insert inside with wet glue.
More Products from Jeanette Jackson