Pretty as a Princess Decoupage Plate Card Kit
Make your little princess a special card that will be treasured until she grows up and maybe even then kept as a cherished momento she can show her children.
This adorable plate card is 5.5 inches in diameter and comes with it?s own matching 6x6 inch envelope, or it will fit a standard 6x6 inch envelope if you don?t want to make the matching envelope. Step by step instructions are included on each of the sheets.
This card can be made with or without the decoupage layers, and the plate stand will fit in the envelope flattened to minimise bulk.
This kit contains:
- a sheet with the plate base and stand
- a sheet with the decoupage layers and a blank greetings panel for the back of your plate
- an envelope front sheet
- an envelope back sheet
- a matching A4 backing paper sheet in case you want to print it onto the back of your plate and stand
All the sheets are 300dpi, high resolution sheets, for quality printing.
Photographs from the Community (4)
I printed the plate and stand onto 250gsm glossy photo paper,the decoupage onto 200gsm glossy paper, the insert panel onto 160gsm paper.
I cut out all parts, attached the insert to the back of the plate and decoupaged the step by step with glue gel. i added a large gem to the big flower and tiny pink pearls to the crown and waist ribbon.
I made up the pretty envelope with strong DST. This is a gorgeous design for a little girl and looks really cute made up.
I printed the envelope sheets onto 128gsm. matte photo paper, cut out the pieces and made up the envelope using wet glue and DSST.
I printed the main plate and stand sheet onto the heaviest card my printer will take, and the other card sheet onto 200gsm. matte photo paper.
I cut our all the pieces and added the layers to the plate using sticky pads. I completed the card with 3 pink gems on the crown.
The card base & stand sheet was printed onto 250gsm matt photo paper, with the backing paper printed onto the reverse side, while the remaining sheets were printed onto 128gsm matt photo paper.
The card and envelope were then made up as per the instructions included on the sheets.
No additional embellishments have been added.
I printed the plate and stand onto 250gsm glossy photo paper,the decoupage onto 200gsm glossy paper, the insert panel onto 160gsm paper.
I cut out all parts, attached the insert to the back of the plate and decoupaged the step by step with glue gel. i added a large gem to the big flower and tiny pink pearls to the crown and waist ribbon.
I made up the pretty envelope with strong DST. This is a gorgeous design for a little girl and looks really cute made up.
