Twist and POP red
This is a 4 sheet TWIST AND POP mini kit . The card front page comes with a card front at 5x5 inches .
. the card page also comes with the decoupage mat with text and without the text. along with the mat florals .
Then you can the card which is the main card page .
then you can the accordion page with the accordion deco and its florals. on this page you will find the YouTube link also incase you need extra help assembling this card .
Then you have the twist and pop mechanism decoupage along with the optional butterflies and sentiment labels for the inside of the card . there are blank labels also included .
Included are also written instruction with images and the
video tutorial like is right here and on the accordion sheet : https://www.youtube.com/watch?v=PPPekxPAeeU&t=7s
This card is so very versatile and can be used with all occasions.
Photographs from the Community (4)
I printed the inside mechanism onto 260gsm card for strength and then printed the opening panel onto a lighter weight card.
If you use as heavy weight card for this panel it can detach from the main mechanism.
I also used wet glue in the areas shown instead of tape as this too gives a stronger bond when opening and closing the card.
I printed the decoupage elements onto good quality 280gsm photographic paper and cut these out and assembled using thin foam tape.
I printed the panel for the front of the card onto good quality 280gsm photographic paper and cut it out.
I printed the insert onto 160gsm paper and attached this to the inside of the card using double sided tape.
I applied strong double sided tape to each side of the mechanism when closed. I positioned the mechanism in the centre of the insert panels and removed the tape from the area visible.
I closed the card to adhere the mechanism in place, turned the card over and repeated on the other side.
The mechanism is now in place and will open the panel as shown when the card is opened. A beautiful and unusual card when completed.
Printed pattern onto 260gsm matte white card stock from Crafty Bobs. Attached 3D elements with foam pads and dyed the edges. Added greeting, faux gems and a touch of glitter.
Printed pattern onto 260gsm matte white card stock from Crafty Bobs. Attached 3D elements with foam pads and dyed the edges. Added greeting, faux gems and a touch of glitter.
I printed the inside mechanism onto 260gsm card for strength and then printed the opening panel onto a lighter weight card.
If you use as heavy weight card for this panel it can detach from the main mechanism.
I also used wet glue in the areas shown instead of tape as this too gives a stronger bond when opening and closing the card.
I printed the decoupage elements onto good quality 280gsm photographic paper and cut these out and assembled using thin foam tape.
I printed the panel for the front of the card onto good quality 280gsm photographic paper and cut it out.
I printed the insert onto 160gsm paper and attached this to the inside of the card using double sided tape.
I applied strong double sided tape to each side of the mechanism when closed. I positioned the mechanism in the centre of the insert panels and removed the tape from the area visible.
I closed the card to adhere the mechanism in place, turned the card over and repeated on the other side.
The mechanism is now in place and will open the panel as shown when the card is opened. A beautiful and unusual card when completed.
More Products from Sharon Vieira Designs
