Snowflakes Are Kisses From Heaven - Mini Kit
This is a Three Sheet Mini Kit, that has everything you need to make a very pretty Christmas card for Someone Special.
Sheet One has the Main Topper, that fits an 8x8 Card Blank with a Border round so that you can Mat and Layer if wanted.
A small Topper for the reverse of your card and five Greeting Tags, one blank. Sheet Two has the Second and Third Topper Layers, a Matching Gift Tag and Four Greeting Tags. Sheet Three has the Matching Insert.
Photographs from the Community (6)
After printing out on 160gsm decoupage paper and cutting out each element, I decided to back the smaller design with green mirror card as well as the cut out section of the larger design. Using a 7x7 base card I DST the large design onto the base card. Using foam pads I then stuck down the middle of the design already backed with green card. In the corner I used foam pads to also raise the smaller design, also with the green card. To finish off I backed one of the sentiments provided with the same green mirror card and raised this with foam squares. Surrounding the whole design I used silver peel offs, giving it an interesting border.
Using the insert provided I also used snowflake peel offs to decorate the inside.
printed then cut out this card used a white card for this stuck in the insert first then with FT stuck on the base then with 3Dfoam pads
stuck on the decoupage added red gems and some silver gems on the snowflakes .
I printed onto Crafty Bob's photo paper and cut out. The Main Topper was matted onto Gold Mirri card, with d/s tape and attached to a White 8x8 Card Blank.
The Second & Third Topper Layers were added with foam tape and to finish I used the Matching inside, added Glitter, Gems and a Bow.
printed then cut out this card used a white card for this stuck in the insert first then with FT stuck on the base then with 3Dfoam pads
stuck on the decoupage added red gems and some silver gems on the snowflakes .
After printing out on 160gsm decoupage paper and cutting out each element, I decided to back the smaller design with green mirror card as well as the cut out section of the larger design. Using a 7x7 base card I DST the large design onto the base card. Using foam pads I then stuck down the middle of the design already backed with green card. In the corner I used foam pads to also raise the smaller design, also with the green card. To finish off I backed one of the sentiments provided with the same green mirror card and raised this with foam squares. Surrounding the whole design I used silver peel offs, giving it an interesting border.
Using the insert provided I also used snowflake peel offs to decorate the inside.
After printing out on 160gsm decoupage paper and cutting out each element, I decided to back the smaller design with green mirror card as well as the cut out section of the larger design. Using a 7x7 base card I DST the large design onto the base card. Using foam pads I then stuck down the middle of the design already backed with green card. In the corner I used foam pads to also raise the smaller design, also with the green card. To finish off I backed one of the sentiments provided with the same green mirror card and raised this with foam squares. Surrounding the whole design I used silver peel offs, giving it an interesting border.
Using the insert provided I also used snowflake peel offs to decorate the inside.
More Products from Susan Heanes
