Festive Boots - Mini Kit 8x8 NEWCompleted by Jean-Marie Penny

I chose the red boots and printed onto 100gsm paper at full size. Using an 8x8 inch (20x20 cms) I stuck the insert inside using dst. The front base was also added using dst.

Then using 2mm foam pads I attached the boots square to the centre of the blank square. I used 2 of the elves and cut 1 out fully and the other just his coat. I built them up using 1mm foam pads and attached him to the card with 1mm foam pads. The sentiment was attached using 2mm foam pads