Aperture Gatefold Card Kit - the Christmas FlowerCompleted by Lady Rosie Designs

This is a pretty card. I printed the design onto 240 gsm white pearlescent card and the inside image onto 200gm gloss photo paper. I used a glue stick to put on the front left and right sides as it gave me time to move them into place.

I then used 2mm mini foam mounts to add the centre pyramage. I used my own red organza ribbon on the front top and attached it by placing a hole on either side of the gatefold.

I used the Christmas greeting and attached it with 2mm mini mounts and put some light green rhinestones around the edge of the card.

For the envelope I cut out and attached it with a glue stick.