Fan Card - Purple Carnation
This is a new type of card with a 3D fan on the top right corner and a 3D belt with buckle on the body of the card. The kit contains the main card body, a sheet with the inserts, a sheet with the fan and belt pieces, a backing paper and two sheets containing matching envelope pieces. So there are 6 pages in all. Print the main card and fan pieces onto good quality card. The backing paper gets printed onto the back of the main card if desired. Print the inserts and the envelope pieces onto paper. You will need a brad or a gem to finish off the fan.
This particular card has pretty purple carnations and the belt has a silver buckle.
Photographs from the Community (1)
I printed sheets onto good quality smooth card.I also printed background onto back side of main card base.I assembled using dst and 3d foam tape.I punched hole in fan and threaded a tassle through this.I finished by adding a punched butterfly using gold pearlescent card and added a couple ogf crystal gems.I print envelope onto good quality smooth paper and assembled using dst.This is a lovely sheet when made up and is just that little bit different.
