Snowman Family Card KitCompleted by Hazel Pepper

I printed all the sheets out and challenged myself to see how many cards I could make with just one set of prints, some white card and some silver card.

The first card is 17cm x 17cm with a 16cm x 16cm silver mat.

I cut two pieces of paper to 15.5cm x 9 cm and stuck them onto the mat, the top one first, then I stuck a strip of silver to the top of the second piece, which was then stuck down.

I mounted the largest topper onto some silver and stuck down with 2mm foam pads. The second card is 14.5cm x 14.5cm with a silver mat of 14cm x 14cm and a piece paper 13.5cm x 13.5cm on top.

I cut a strip of paper 5cm x 13.5cm, matted it onto silver card and stuck down. Again I mounted the image onto silver and stuck down with 2mm foam pads. The third card was 15cm x 12.5cm with a strip of paper 5cm x 15cm which was matted onto silver.

The topper was onto silver card with 2mm foam pads.

Finally I made three tags from the off cuts and smaller images. After all of this, I still had bits left!