Amid the Winter Snow, Luxury 8x8 3d Gatefold Card and Designer Gift Bag Kit
Make this beautiful luxury gatefold card, it is approx. 8"x8" and has a lot of decoupage to make it really stand out. When closed the Decoupage shows through the aperture. Included in the kit is a beautiful Designer style presentation Gift Bag, which accommodates the depth of the card nicely and also has a working front pocket for a Gift Card or even Cash, and a faux zipper pocket on the reverse. Or it can just be used as a lovely gift bag to pop a gift in. On the reverse of the card there is a pocket with a large ornate tag, to write your greeting on. There are plenty of general Christmas & Religious sentiment labels to personalise the card.
Easy to make with full colour picture instructions.
I'm sure any recipient will be delighted.
Photographs from the Community (2)
I printed the design onto good quality photographic paper and 260gsm card and cut these out. I scored and folded the tabs on the front panels of the gatefold and attached these to the insert.
I then attached the back of the card using double sided tape to hide these tabs. I added the inside panels of each gatefold door using wet glue. I assembled the decoupage using thin foam tape. I printed the bag onto 260gsm card and cut this out.
I assembled the bag following the clear instructions and attached the handles using brads before attaching the back and front panels to the main base of the bag.
I made the tassel using 160gsm paper and attached this to the bag using ribbon. From the base to the top of the handles is 10 inches. This is an amazing bag and will hold a good sized gift if you wanted to use the bag on its own.
I printed the design onto good quality photographic paper and 260gsm card and cut these out. I scored and folded the tabs on the front panels of the gatefold and attached these to the insert.
I then attached the back of the card using double sided tape to hide these tabs. I added the inside panels of each gatefold door using wet glue. I assembled the decoupage using thin foam tape. I printed the bag onto 260gsm card and cut this out.
I assembled the bag following the clear instructions and attached the handles using brads before attaching the back and front panels to the main base of the bag.
I made the tassel using 160gsm paper and attached this to the bag using ribbon. From the base to the top of the handles is 10 inches. This is an amazing bag and will hold a good sized gift if you wanted to use the bag on its own.