Sunset Roses Bow Window Card Kit

I printed the design onto good quality 255gsm photographic paper and the backing paper and insert onto 160gsm paper and cut these out.

I scored and folded the design as instructed. I assembled the decoupage using thin foam tape.

I cut out the aperture as instructed and attached acetate using strong double side tape. This forms the window. I cut the slits above and below the design on the front of the card. I placed some strong double sided tape to the top tab of the window and threaded this through the top slit securing at the back.

The bottom tab is not secured in this manner as it has to be removed from the slit for posting.

I attached the backing paper to the inside of the card and then the insert using double sided tape. I printed the envelope onto 160gsm paper and cut it out. I assembled the envelope using strong double sided tape. I added the greeting using thin foam tape.