Lavender Lady Fancy Silver Locket Card Front
I have designed these new locket toppers as a 3D style card front topper. Simply cut out the locket (the double part) and then cut out the small hinge,
fold the hinge and locket in half and attach half to the back of the picture part of the locket, leaving a flap hanging. Then stick to your card,
then cut the frame out and mount using foam or silicone onto the picture in the locket and then cut the front of the locket out and
glue to the front of the locket..simple.
I have made these lockets to fit a 6x4inch card.
Photographs from the Community (1)
Printed this sheet of twice as I wanted the front piece to make a backing for the locket as I wanted it free moving and not stuck to the card. Also wanted the clasp so that I could glue them back to back to give a finished look.
made an 8x8 card in black mat and layered a white piece of backing paper with silver foil effect onto silver mirri card. On a smaller piece of mirri card mounted more of the backing paper and wrapped a wide piece of ribbon around it and stuck it to the card. Tied a knot in the ribbon to give a bow effect.
Added ribbon to the locket.(This has to be done before you glue down the backing paper as the ribbon ends are placed behind the backing sheet to give a better finish).
Added a greeting and you now have a finished card.
