Digi Stamp - Owls 3

I printed these images on to 160 gsm card and coloured both in with chameleon pens.

I made two different cards from each picture and used a couple of the sentiments.

Card 1:

Using an A5 card cut a piece of black card measuring 14.5 cms by 20.5 cms.

Cut a piece of white card measuring 14 cms by 20 cms.

Matt and layer together and attach some black ribbon to the top right and bottom left corners.

Then attach to the card base.

Cut a piece of black card measuring 11 cms by 16.5 cms.

Matt and layer with the first digi topper and attach to the card base using foam pads.

To finish add a sentiment to the bottom right.

Card 2:

Using a 7" by 10" card score the front in half to make a z-fold card shape.

Cut a piece of black card measuring 24.5 cms by 17 cms.

Cut a piece of decorative paper measuring 24 cms by 16.5 cms.

Matt and layer together and attach to the inside of the card base.

Next cut a piece of black card measuring 24.5 cms by 8.5 cms.

Cut a piece of decorative paper measuring 24 cms by 8 cms.

Matt and layer together and attach to the front of the card base.

Then cut a piece of black card measuring 10.5 cms by 16.5 cms, matt and layer with the second digi topper.

Using foam pads attach this to the front of the card base in the centre.

To finish make white and black matt layers for two of the sentiments.

Using foam pads attach one sentiment above the digi topper and one beneath.

I printed these images on to 160 gsm card and coloured both in with chameleon pens.

I made two different cards from each picture and used a couple of the sentiments.

Card 1:

Using an A5 card cut a piece of black card measuring 14.5 cms by 20.5 cms.

Cut a piece of white card measuring 14 cms by 20 cms.

Matt and layer together and attach some black ribbon to the top right and bottom left corners.

Then attach to the card base.

Cut a piece of black card measuring 11 cms by 16.5 cms.

Matt and layer with the first digi topper and attach to the card base using foam pads.

To finish add a sentiment to the bottom right.

Card 2:

Using a 7" by 10" card score the front in half to make a z-fold card shape.

Cut a piece of black card measuring 24.5 cms by 17 cms.

Cut a piece of decorative paper measuring 24 cms by 16.5 cms.

Matt and layer together and attach to the inside of the card base.

Next cut a piece of black card measuring 24.5 cms by 8.5 cms.

Cut a piece of decorative paper measuring 24 cms by 8 cms.

Matt and layer together and attach to the front of the card base.

Then cut a piece of black card measuring 10.5 cms by 16.5 cms, matt and layer with the second digi topper.

Using foam pads attach this to the front of the card base in the centre.

To finish make white and black matt layers for two of the sentiments.

Using foam pads attach one sentiment above the digi topper and one beneath.