HARE: A4 Background Paper/Backing Paper With Commercial Use
This A4 Hare background/backing paper is designed to match my "Hare Today & Gone Tommorrow" Birthday design (cup950376_79993). But it'll also work well by itself in any project involving spring or Easter, or of course, for anyone who loves hares!
The sheet prints out well (300dpi) at ordinary A4 size, with a small white border around the edge.
Like all my designs, this sheet comes with small-scale commercial use, so you you may sell any physical items you physically hand-make yourself using this sheet (eg on CUP, at craft fairs, etc.)
Hope you have lots of fun with this!
Photographs from the Community (4)
Printed (at a reduced size) and cut out design pieces from main design (cup950376_79993) as well as this matching background paper.
I made a white easel card and cut 3 pieces of background design (slightly smaller than front of easel base, slightly smaller than front of easel upright and slightly smaller than the front of the easel card.
Each piece of background design was mounted onto black card with DST, trimmed to leave a narrow border and then secured to each part of the easel card with DST.
The main topper was then mounted onto black card with DST and trimmed to leave a narrow border.
Before securing this to the front of the easel card I cut a piece of white card the exact size and secured to reverse of topper (so the back side of the easel is all white).
This was then secured to front of easel with foam pads, along with decoupage. I used one of the sentiments ('Hare' today and gone tomorrow!), secured with foam pads, to act as a 'stopper'.
A 'fun' card, which isn't difficult to make and is sure to make the recipient smile.
By combining both the main design sheet and background paper lots of 'different' cards can be made. Luv it!
Printed (at a reduced size) and cut out design pieces from main design (cup950376_79993) as well as this matching background paper.
I made a white easel card and cut 3 pieces of background design (slightly smaller than front of easel base, slightly smaller than front of easel upright and slightly smaller than the front of the easel card.
Each piece of background design was mounted onto black card with DST, trimmed to leave a narrow border and then secured to each part of the easel card with DST.
The main topper was then mounted onto black card with DST and trimmed to leave a narrow border.
Before securing this to the front of the easel card I cut a piece of white card the exact size and secured to reverse of topper (so the back side of the easel is all white).
This was then secured to front of easel with foam pads, along with decoupage. I used one of the sentiments ('Hare' today and gone tomorrow!), secured with foam pads, to act as a 'stopper'.
A 'fun' card, which isn't difficult to make and is sure to make the recipient smile.
By combining both the main design sheet and background paper lots of 'different' cards can be made. Luv it!
Printed (at a reduced size) and cut out design pieces from main design (cup950376_79993) as well as this matching background paper.
I made a white easel card and cut 3 pieces of background design (slightly smaller than front of easel base, slightly smaller than front of easel upright and slightly smaller than the front of the easel card.
Each piece of background design was mounted onto black card with DST, trimmed to leave a narrow border and then secured to each part of the easel card with DST.
The main topper was then mounted onto black card with DST and trimmed to leave a narrow border.
Before securing this to the front of the easel card I cut a piece of white card the exact size and secured to reverse of topper (so the back side of the easel is all white).
This was then secured to front of easel with foam pads, along with decoupage. I used one of the sentiments ('Hare' today and gone tomorrow!), secured with foam pads, to act as a 'stopper'.
A 'fun' card, which isn't difficult to make and is sure to make the recipient smile.
By combining both the main design sheet and background paper lots of 'different' cards can be made. Luv it!
Printed (at a reduced size) and cut out design pieces from main design (cup950376_79993) as well as this matching background paper.
I made a white easel card and cut 3 pieces of background design (slightly smaller than front of easel base, slightly smaller than front of easel upright and slightly smaller than the front of the easel card.
Each piece of background design was mounted onto black card with DST, trimmed to leave a narrow border and then secured to each part of the easel card with DST.
The main topper was then mounted onto black card with DST and trimmed to leave a narrow border.
Before securing this to the front of the easel card I cut a piece of white card the exact size and secured to reverse of topper (so the back side of the easel is all white).
This was then secured to front of easel with foam pads, along with decoupage. I used one of the sentiments ('Hare' today and gone tomorrow!), secured with foam pads, to act as a 'stopper'.
A 'fun' card, which isn't difficult to make and is sure to make the recipient smile.
By combining both the main design sheet and background paper lots of 'different' cards can be made. Luv it!