Boyz Room Mini Theme
5 Papers and 11 Elements
Photographs from the Community
I took several elements from this kit into one of my graphics packages and resized, moved and manipulated until I was happy with a layout for the front of an 8" square card. This was then printed out onto 300gsm Super Smooth white cardstock and cut out. I also cut out an aperture in the frame. I printed and coloured in digi-stamp cup456654_1749 in a size to fit in the aperture. The coloured in digi was stuck to the front of an 8" square Crafty Bob card at approximately the location of the aperture on the card front using glue gel. The card front was then stuck on using 1mm deep, double side, foam tape. Because I'd used glue gel for attaching the digi beneath I could then gently move this to the right position through the aperture before pressing it firmly in place. I've not put a greeting on the card yet as I don't know what language it will be needed in.
Whether using for card fronts or scrapbook layout this kit is very versatile.
![](http://www.pinterest.com/pin/create/button/?url=https://www.craftsuprint.com/scrapbooking/paper-sets/various-paper-sets/boyz-room-mini-theme.cfm&media=https://s3.amazonaws.com/finished-cards/gwyneth-george/photo619148.jpg&description=Boyz Room Mini Theme%20on%20Craftsuprint%20created%20by%20GWYNETH GEORGE%20-%20I took several elements from this kit into one of my graphics packages and resized, moved and manipulated until I was happy with a layout for the front of an 8" square card. This was then printed out onto 300gsm Super Smooth white cardstock and cut out. I also cut out an aperture in the frame. I printed and coloured in digi-stamp cup456654_1749 in a size to fit in the aperture. The coloured in digi was stuck to the front of an 8" square Crafty Bob card at approximately the location of the aperture on the card front using glue gel. The card front was then stuck on using 1mm deep, double side, foam tape. Because I'd used glue gel for attaching the digi beneath I could then gently move this to the right position through the aperture before pressing it firmly in place. I've not put a greeting on the card yet as I don't know what language it will be needed in.
Whether using for card fronts or scrapbook layout this kit is very versatile.){kind=link}