Purple Pansies Diamond 7x5inch Picture Card Front Frame
I have designed this card front and frame to a 7x5inch square. A very simple and effective look for your cards.
Simply cut the base out and attach to your card then cut the frame out, this might take alittle bit of time as there is a bit of detail and could be a bit fiddly but thats what its all about.
Then using silicone glue or 3D foam pads simply attach the outer frame to the base. The card front could be used on its own and so could the frame for another option. This does make a beautiful card front and add your own message for a finished look.
Or make a shaker card out of it..
Photographs from the Community
A very sweet card that I printed a few times and framed the front piece with the blank insert frame which I cut out the middle.
I used a plastic film and cut out the back of the front card stock and sandwiched the plastic between the main piece Added a butterfly then plastic and the frame.
Then I put a thin white paper over the left insert side. This made the light show through the front when placed near or held up a light source. I used the frame piece that I copied leaving the white for a message.
So useful for any girl or lady occasions. Just as nice and very easy if you print, cut, fold and add to card. Thanks AMV. Lovely love.
A very sweet card that I printed a few times and framed the front piece with the blank insert frame which I cut out the middle.
I used a plastic film and cut out the back of the front card stock and sandwiched the plastic between the main piece Added a butterfly then plastic and the frame.
Then I put a thin white paper over the left insert side. This made the light show through the front when placed near or held up a light source. I used the frame piece that I copied leaving the white for a message.
So useful for any girl or lady occasions. Just as nice and very easy if you print, cut, fold and add to card. Thanks AMV. Lovely love.
A very sweet card that I printed a few times and framed the front piece with the blank insert frame which I cut out the middle.
I used a plastic film and cut out the back of the front card stock and sandwiched the plastic between the main piece Added a butterfly then plastic and the frame.
Then I put a thin white paper over the left insert side. This made the light show through the front when placed near or held up a light source. I used the frame piece that I copied leaving the white for a message.
So useful for any girl or lady occasions. Just as nice and very easy if you print, cut, fold and add to card. Thanks AMV. Lovely love.