Cute Cats Quick Card with Wavy Spiral Side Stacker
An easy to make Wavy Spiral side stacker card, Each of the layers is numbered and is added in
turn to the base layer to create a design that twists and spirals into a stunning 3d decoupage
effect that draws your eye to the centre. A really easy to make card that produces stunning
cards!
This design can be used on it's own or together with the matching Cut and fold quick Card.
This design is also available in other coordinating designs/colourways and together they would
make a great set of cards to sell at craft fairs etc.
Photographs from the Community
I made a base card 13x6.5inches from an A3 sheet of white hammered card and made into an easel card.
I printed the cup sheet onto glossy photo paper and cut out. I took the cup sheet into a graphics programe and made backing sheets.
I cut a 6inch square of silver mirri card and layered a 5.75inch square of backing paper onto it with double sided tape.
I stuck the base picture to a 4.75inch square of silver mirri card and stuck to the centre of the backing sheet on the larger square, then layered up the decoupage.
I also stuck some backing sheet to the back of the main picture when the decoupage was dry.
I then attached the bottom half to the front section of the main card. I cut a piece of silver mirri paper and stuck to the bottom layer of the card. A square of backing paper was stuck to the silver mirri paper leaving a small border. This should mirror the front of the card.
I made a message tag using white card, silver mirri card and a piece of backing paper amd attached to the middle of the bottom of the card with foam tape, then added a silver Happy Birthday peel off.