Christmas Roses Snow 7x5in Spiral Wavy Edge Stacker
I have designed this card front in my spiral edge stacker concept to create a spiral edge around the card front.This is a 7inch x 5inch square card front so it will fit the A5 cards if you add a backing paper.
Simply cut out the base image and attach to your card or project flat, then cut out the edges starting at number 1.
Glue your edges using a 3D glue or foam pads, and attach to the base image going around the outside, each edge overlaps the last, this will build up the outside edge into a 3D decoupage effect.
As you glue the edges you are going around the card in a spiral effect.
Photographs from the Community
I chose an A4 blue marble 200gsm board and folded it in half for my card. I attached the basecard and then followed the instructions for the wavy stacker edges.
This is very impressive when finished as the edges force you to see the centre as the main piece of the card and your eyes are directly drawn to it.
To finish the card off I placed corner stickers and used the sentiments from another card that were left over.
I placed an insert inside which completed the card ready for use.
It is able to be used for many different occassions and anyone would be happy to receive this card.