Aftershave 60th Birthday Gift Set 7x5in Spiral Edge Stacker
I have designed this card front in my spiral edge stacker concept to create a spiral edge around the card front.This is a 7inch x 5inch square card front so it will fit the A5 cards if you add a backing paper.
Simply cut out the base image and attach to your card or project flat, then cut out the edges starting at number 1.
Glue your edges using a 3D glue or foam pads, and attach to the base image going around the outside, each edge overlaps the last, this will build up the outside edge into a 3D decoupage effect.
As you glue the edges you are going around the card in a spiral effect.
Photographs from the Community
I printed the sheet onto gloss photo card and cut out all the elements. I made up the topper using foam pads; I mounted the topper onto three mats, pink black and gold. I then mounted the completed topper onto an A5 card blank.
This card was very simple card to make but is something that little bit different.