Oriental Pandas 2 Spiral Wavy Edge Stacker Card Front
I have designed this based on my original concept to create a spiral edge stacker around a card front
however this design has the wavy edges as you build the layers. The edges are easy to cut out with being wavy.
This is a 5inch x 5inch square card front, and you simply cut out the base image and attach
to your card or project flat, then cut out the edges starting at number 1. Glue your edges using
a 3D glue or foam pads, and attach to the base image going around the outside, each edge
overlaps the last, this will build up the outside edge into a 3D decoupage effect. As you
glue the edges you are going around the card in a spiral effect.
Photographs from the Community
I covered an A5 landscape card with a piece of cerise and gold card. The pattern on the card was oriental blossoms. I mounted the main image of the panda to the left hand side of the card and added the spiral side tracker pieces.
I made a sentiment with a piece of gold mirriboard edged with a bamboo peel off and a black sentiment, I added a bow made from a gold peel off mounted onto cerise mirriboard and gold peel off corners to finish the card.